Audit Trail
CL5010AT - Setting up a Replacement USB
If you lose or damage your USB stick, any standard USB stick may be used as a replacement. Please note that encrypted USB sticks will not function with the CL5010 AT locks/kits. You will need to activate any new USB sticks by following the steps ...
CL5010AT - Upload and Download Sequences
From Lock to USB (Upload audit data and information transfer) #Master Code • 19 • 1 • • Red flashes for 10 seconds followed by 35 seconds of blue flashing. Audible beep will confirm when this program has finished running. From USB to lock ...
CL5010AT - Understanding the Audit Trail
You'll find below an overview for each the the collumns shown when viewing the Audit Trail. Index – The audit trail’s entry number Details – The user’s details (entered in the User ID settings page) Date/Day/Time – When this ...
Data Manager User Manual
Codelocks CL5000AT USB Data Manager User Manual Version 2.1.5.5 Main Features This software is designed to be used with the Codelocks CL5000AT electronic lock and will allow CL5000AT users to upload and download data to a USB stick, which can then ...
CL5000AT - Programming and Operating Instructions
Codes - The Basics • The factory set Master Code is #1234. This should be changed immediately after installation (see Program 10). • The Master Code and optional Sub-Master Code always start with the # prefix. This puts the lock into Programming ...
CL5010AT - Setup the Audit Trail
a) Install the lock to your door. b) Set up audit trail on lock by entering in the below program. #MasterCode • 16 • Date • Date • DayofTheWeek • DayofTheWeek • Time • Time • DSTstart • DSTstart • DSTend • DSTend • DoorID • DoorID ...
CL5010AT - Save Audit Trail
When you need to save your audit trail this can be done in a couple of ways. You can either save your audit as a .csd file (Codelocks Data File) by using the Save as… button or going to File and then Save copy of current data file. CSD files can be ...
CL5010AT - Access Parameters
Important: You will be prompted to enter your MasterCode before any changes are made to your settings. Main Settings From this page, you can change the general settings for your lock. a) Daylight Saving Settings – It is important that this is ...
CL5010AT - Data Manager User Manual
Codelocks CL5000AT USB Data Manager User Manual Version 2.1.5.5 Main Features This software is designed to be used with the Codelocks CL5000AT electronic lock and will allow CL5000AT users to upload and download data to a USB stick, which can ...
CL5510 - Mortice Latch Installation Template
Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet. Open ...
CL5510 - Mortise Latch US Version Installation Template
Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet. Open ...
CL5000AT - Installation Instructions
Box Contents Check the contents of the box are correct according to the model. OPERATIONS CHECK You should familiarise yourself with the operation of the lock and check that all parts work properly. Remove the battery cover from the back plate ...
CL5000AT - Sequence Chart
Important! When printing PDF documents, please check your print settings to make sure that the chart is printed at 100% of the actual size. Open Sequence Chart PDF 16:v3 © 2019 Codelocks Ltd. All rights reserved.