CL5010AT - Setting up a Replacement USB

CL5010AT - Setting up a Replacement USB


CL5000AT LOGO

 

If you lose or damage your USB stick, any standard USB stick may be used as a replacement. Please note that encrypted USB sticks will not function with the CL5010 AT locks/kits. You will need to activate any new USB sticks by following the steps below:

 

  1.     Connect an empty USB stick to the computer

  2.     Open the Codelocks Data Management Software

  3.     From the Tools menu, select Activate Codelocks Memory Stick

  4.     Select the memory stick to activate

  5.     Click Activate

 

Important

Please note that when you save your new settings (including User Codes), re-opening the USB stick with the software will not show the new settings. You will not be able to view these until those changes have been uploaded to the lock.

The time it takes to upload the new settings to the lock will vary. With large numbers of User Codes, especially if you have also set Active Periods for those User Codes, it is not uncommon for the upload process to take several minutes.

 

 © 2019 Codelocks Ltd.  All rights reserved.

    • Related Articles

    • CL5500 - Programming and Operating Instructions

      Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on how to download, set up and use C3 Smart with your Codelocks Smart Locks, visit: c3smart.net or contact Codelocks Support . About CL5500 The CL4500 and ...

    • CL4500 - Programming and Operating Instructions

      Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on how to download, set up and use C3 Smart with your Codelocks Smart Locks, visit: c3smart.net or contact Codelocks Support. About CL4500 The CL4500 and ...

    • CL4500 - Getting Started Guide

      Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on how to download, set up and use C3 Smart with your Codelocks Smart Locks, visit: c3smart.net or contact Codelocks Support. About Codelocks Smart Locks ...

    • CL Series - REM Ports

      Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on how to download, set up and use C3 Smart with your Codelocks Smart Locks, visit: c3smart.net or contact Codelocks Support. Overview The REM ports are ...

    • CL Series - REM Ports

      Overview The REM ports are digital input/outputs; which work via a HIGH/LOW state change either being detected by the lock or the lock providing the state change for something else (alarm panel/CCTV) to detect depending on the configuration of the ...