CL4000
CL4000 - Programming and Operating Instructions
Codes - The Basics • The factory set Master Code is # 1234. This should be changed immediately after installation (see program 10). • The Master Code and optional Sub-Master Code always start with the # prefix. This puts the lock into Programming ...
CL4000 - Installation Instructions
Box Contents Check the contents of the box are correct according to the model Tools Required This box should also contain an Installation Template and Programming and Operating Instructions. Power Drill Drill bits 5010 10 (3⁄8") & 25mm (1") Drill ...
CL4010 - Installation Template
Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet. Open ...
CL4020 - Installation Template
Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet. Open ...