Key Secure by Codelocks - Installation Instructions
Note: This product range is avalible in the US ONLY
IMPORTANT INSTALLATION NOTES
Key Secure by Codelocks cabinets are supplied fully assembled, ready to install in your chosen location. Cabinets are provided with 1/4” mounting holes through the back of the cabinet, accessible while the cabinet door is open. Cabinets must be installed by a competent person, at a height suited to the users, using appropriate fasteners for the wall type and cabinet weight (including keys and/or padlocks).
TOOLS REQUIRED
- Pencil
- Spirit level
- Power drill
- Screwdriver
- Fasteners to suit wall material
- Drill bits to suit chosen fasteners
INSTALLATION INSTRUCTIONS
- With the door open, position the cabinet against the wall making sure it is level and at a suitable height. Mark the position of the mounting holes.
- Put the cabinet down and drill the holes using the appropriate drill bit for the wall type and fasteners.
- Secure the cabinet to the wall using your chosen fasteners. Tighten each fastener a little at a time, rather than one fully, to avoid distorting the cabinet.
INSTALLATION INSTRUCTIONS (Continued)
Floor standing cabinets are extremely heavy and must be secure to a wall to prevent tipping. In addition, we recommend floor standing cabinets are secured to the floor - please note that no mounting holes are provided in the base of the cabinet.Floor standing cabinets should be installed on a flat floor or plinth that is suitable for the weight of the cabinet (including keys and/or padlocks). Please note, when opening the doors, the cabinet can tip forwards. Ensure you have a second person to help install these cabinets.
- With the door open, and a second person holding the cabinet upright, position the cabinet against the wall making sure it is level. Mark the position of the mounting holes.
- Move the cabinet to one side and drill the holes using the appropriate drill bit for the wall type and fasteners.
- Secure the cabinet to the wall using your chosen fasteners. Tighten each fastener a little at a time, rather than one fully, to avoid distorting the cabinet.
© 2019 Codelocks Ltd. All rights reserved.
Related Articles
KitLock Slam Latch - Installation Instructions
Suitable for use with the KitLock KL1000 family: KL1000 Classic, KL1000 Classic+, KL1000 G3, KL1000 G3 NetCode, KL1000 NetCode, KL1000 RFID. SPECIAL NOTE The maximum door thickness when using the Slam Latch is 20mm (3/4”). Before installation, ...KL1100 KeyPad - Installation Instructions & Template
INSTALLATION Please read carefully: Before installing the lock, read the programming and operating instructions suited to your KL1100 model. Please note, the KL1100 RFID requires a Master Card to be assigned on powering up. Instructions can be found ...KL1100 RFID - Installation Instructions & Template
INSTALLATION Please read carefully: Before installing the lock, read the programming and operating instructions suited to your KL1100 model. Please note, the KL1100 RFID requires a Master Card to be assigned on powering up. Instructions can be found ...Key Secure by Codelocks - FAQ
Note: This product range is avalible in the US ONLY Does the cabinet come with installation fasteners? Due to the wide variety of wall conditions that the cabinets may be installed on, along with the weight of the cabinet (incl. keys and padlocks), ...Key Secure by Codelocks - FAQ
Does the cabinet come with installation fasteners? Due to the wide variety of wall conditions that the cabinets may be installed on, along with the weight of the cabinet (incl. keys and padlocks), the user will need to supply the proper installation ...