CL2210 - US Installation Template

CL2210 - US Installation Template

Important!

When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size.
Once printed, check the measurements on the template with a ruler before drilling your door or cabinet.



 

IT-CL2210MD-CLINC-v1:0518

 © 2019 Codelocks Ltd.  All rights reserved.
    • Related Articles

    • KL1100 RFID - Installation Instructions & Template

      INSTALLATION Please read carefully: Before installing the lock, read the programming and operating instructions suited to your KL1100 model. Please note, the KL1100 RFID requires a Master Card to be assigned on powering up. Instructions can be found ...
    • KL1100 KeyPad - Installation Instructions & Template

      INSTALLATION Please read carefully: Before installing the lock, read the programming and operating instructions suited to your KL1100 model. Please note, the KL1100 RFID requires a Master Card to be assigned on powering up. Instructions can be found ...
    • Codelocks US Website Terms and Conditions

      BUYER CONSENTS TO THE FOLLOWING TERMS AND CONDITIONS: Seller’s acceptance of Buyer’s orders is expressly made conditional on Buyer’s assent to these terms and conditions.   Introduction This website is owned and operated by Codelocks. Any orders ...
    • KitLock Slam Latch - Installation Instructions

      Suitable for use with the KitLock KL1000 family: KL1000 Classic, KL1000 Classic+, KL1000 G3, KL1000 G3 NetCode, KL1000 NetCode, KL1000 RFID. SPECIAL NOTE The maximum door thickness when using the Slam Latch is 20mm (3/4”). Before installation, ...
    • KL1000 G3 Installation Template

      IMPORTANT Before you print: Check your print settings to make sure that the template is printed at 100% actual size. Check the measurements on the template with a ruler before drilling your door or cabinet. View, Download & Print Template