Adding a KitLock Locker Lock to the Portal

Adding a KitLock Locker Lock to the Portal

1. From the Codelocks Connect Portal homepage go to the Manage your Locks & Access drop down menu, select All Locks and then Add New Lock.

2. Choose your KitLock by Codelocks Locker Lock, then on the next page select the time zone where the lock will be located, and only if you have already changed it, the Master Code. Then click on Generate Initialisation Sequence.

Note
: After you have set up the lock make sure to change your Master Code. The programming sequence for this can be found in your programming and operating instructions




3. As soon as you have clicked Generate Initialisation Sequence, a programming sequence will be displayed further down the page. Immediately enter this sequence into the lock and fill in your Lock Name, Location and Description (optional).

Note
: Depending on which lock you are adding, you may need to use the Master Code to access the # key so that you can enter the initialisation sequence.

Note
: If the lock beeps and flashes red halfway through the sequence, an incorrect lock model was selected in step 2.




4. Once this has been completed click on Save and Exit to save and go back to your list of saved locks. Or alternatively, click on Add Another Lock, scroll back up to step 1 and click on Generate Initialisation Sequence to initialise another lock.




© 2022 Codelocks Ltd.  All rights reserved.

    • Related Articles

    • Adding a Codelocks Smart Lock to the Portal

      1. Log into the App* on your Android or iOS device. 2. Tap on the + logo in the top right-hand corner to add a lock. On the next page, enter the lock model number (CL4510 or CL5510) and give it a name. Note: The lock DIN is case-sensitive. ...
    • Codelocks Connect Portal FAQ

      When I try to add an associated user, it says they already have an account and will not let me proceed, why? This is because the email address has already registered for a Codelocks Connect Portal account, either as an administrator, or an associated ...
    • Codelocks Connect Portal FAQ

      When I try to add an associated user, it says they already have an account and will not let me proceed, why? This is because the email address has already registered for a Codelocks Connect Portal account, either as an administrator, or an associated ...
    • Register for a New Account

      1. From the welcome page select Register in the top left-hand corner and then fill in the registration form. Important Note: When setting your password make sure to include a minimum of twelve characters including an upper and lower case letter, a ...
    • How to request a NetCode via SMS

      1. For a phone number to be able to request a NetCode it will first need to be added to the whitelist.  To do this, from the Codelocks Connect portal homepage click on Manage your Locks & Access, then Whitelist. 2. Click on Add New and when prompted, ...