Amend Clients

Amend Clients


 

  1. In the clients section of the app, swipe left on the client you would like to amend to view the options available.

 

      Info: From here you can change the access times, name etc of the client.

      Suspend: Remove all access to the lock.

      Delete: Removes client completely.

 

     2. Alternatively, if you swipe left on the lock and open actions you can suspend, delete or restore access to all clients in one go.

 

 © 2019 Codelocks Ltd.  All rights reserved.

    • Related Articles

    • How to Amend a Client

      Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on how to download, set up and use C3 Smart with your Codelocks Smart Locks, visit: c3smart.net or contact Codelocks Support. 1. From the Clients section ...

    • KL1100 RFID - Programming and Operating Instructions

      ABOUT KL11OO The KL1100 can operate in Standalone Mode. THE BASICS Penalty Time Presenting an unregistered card 3 times will incur a 10 second time delay before any further use is possible. Batteries The KL1100 uses 4 x AA batteries. Always use high ...

    • Add a New Client

      Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on how to download, set up and use C3 Smart with your Codelocks Smart Locks, visit: c3smart.net or contact Codelocks Support. 1. Go to the Clients logo at ...

    • C3 Smart User Guide

      Download C3 Smart 1) Search the App store (iOS devices) or Google Play Store (Android devices) for C3 Smart2) Once located and installed, launch the C3 Smart application. Note: You may be prompted during set up to provide the application special ...

    • Change the NetCode Mode

      Important note: When using the NetCode, you will only be able to use one mode at a time. For example if you are using Standard (both) mode you will be unable to use ACC or URM. If you change the mode to ACC, then you will be unable to use NetCodes ...