A3 RFID - Installation Template
Important!
When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size.
Once printed, check the measurements on the template with a ruler before drilling your door or cabinet.
IT-AL03RM-v1-0819
© 2019 Codelocks Ltd. All rights reserved.
Related Articles
A3 RFID - Getting Started Guide
ABOUT The A3 RFID Standalone Door Controller is a compact, standalone programmable access control system that provides proximity access for up to 1000 users. SPECIFICATIONS Clients Compatible With 13.56MHz MIFARE® (ISO14443 Type A) Max. ...KL1100 RFID - Installation Instructions & Template
INSTALLATION Please read carefully: Before installing the lock, read the programming and operating instructions suited to your KL1100 model. Please note, the KL1100 RFID requires a Master Card to be assigned on powering up. Instructions can be found ...A3 DUAL - Installation Template
Important! When printing templates, check your print settings to make sure that the template is printed at 100% of the actual size. Once printed, check the measurements on the template with a ruler before drilling your door or cabinet. Open ...KL1100 KeyPad - Installation Instructions & Template
INSTALLATION Please read carefully: Before installing the lock, read the programming and operating instructions suited to your KL1100 model. Please note, the KL1100 RFID requires a Master Card to be assigned on powering up. Instructions can be found ...KL1100 RFID - Getting Started Guide
ABOUT KL1100 RFID The KL1100 RFID can operate in Standalone Mode or in Remote Card Authorisation (RCA) Mode. RCA Mode gives the ability to remotely set-up and allocate cards to locks or lock groups with our offline or cloud based software. This ...